View 67-21-RSC-FT2V1B-2T_569674.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Features
P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version
Descriptions
The 67-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use.
Device Selection Guide
Chip Emitted Color Material AlGaInP Brilliant Red Water Clear Resin Color
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 1 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Package Dimensions
Note: Tolerance unless mentioned is 0.1mm; Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 2 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage Forward Current Peak Forward Current(Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature
)
Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 50 100 120 2000 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 Typ. ----120 632 ----20 -----Max. 900 --------631 ----2.35 10 Unit mcd deg nm nm nm V A for 10 sec. for 3 sec. Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Units V mA mA mW V
Electro-Optical Characteristics (Ta=25
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 p d VF IR 360 --------621 -----
)
Min.
1.75 -----
Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 3 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Bin Range of Luminous Intensity
Bin Code T2 U1 U2 V1 Min. 360 450 565 715 Max. 450 565 715 900 mcd IF=20mA Unit Condition
Bin Range of Dominant Wavelength
Group F Bin Code FF1 FF2 Min. 621 626 Max. 626 631 nm IF=20mA Unit Condition
Bin Range of Forward Voltage
Group Bin Code 0 B 1 2 Min. 1.75 1.95 2.15 Max. 1.95 2.15 2.35 V IF=20mA Unit Condition
Notes: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 4 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Typical Electro-Optical Characteristics Curves
Spectrum Distribution 100 Relative luminous intensity ( % ) 75 Ta=25C I (mA) 50 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Current vs. Forward Voltage Ta=25C
50 25 0 550
600 650 700 Wavelength p(nm) Luminous Intensity vs.
750
Forward Current
Forward Voltage VF (V) Luminous Intensity vs Forward Current Relative luminous intensity ( %)
1000
Relative luminous intensity ( % )
1000
Ambient Temperature
Ta=25C
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
10 10
10
1
10
2
10
3
Ambient Temperature Ta(C ) Forward Current Derating Curve 60 I (mA) 50 40 30 20 10 0 0 20 40 60 85 100 1.0 0.9 0.8 0.7
Forward Current I (mA) Radiation Diagram 0 10 20 Ta=25C 30
Forward Current
40 50 60 70 80 90
0.5 0.3
0.1
0.2 0.4 0.6
Ambient Temperature Ta (C )
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 5 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Label Explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX CAT : XXX HUE : XXX REF : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: Tolerance unless mentioned is 0.1mm; Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-0003710 http://www.everlight.com Prepared date: 2-JUNE -2010 Rev. 1 Page: 6 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel.
Note: Tolerance unless mentioned is 0.1mm; Unit = mm
Moisture Resistant Packaging
Label
Aluminum moistue-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 7 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re
1
Reflow Soldering
Temp. : 260 5 Min. 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100
6 Min.
22 PCS
0/1
2
Temperature Cycle
300 Cycles
22 PCS.
0/1
3
Thermal Shock
300 Cycles
22 PCS.
0/1
4
High Temperature Storage
1000 Hrs.
22 PCS.
0/1
5
Low Temperature Storage
Temp. : -40
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA / 25
1000 Hrs.
22 PCS.
0/1
7
High Temperature / High Humidity
85
/85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 8 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
Precautions for Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168hrs under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C
120 Sec. Max.
.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 9 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Top View LEDs
67-21/RSC-FT2V1B/2T
4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. :DSE-0003710
http://www.everlight.com Prepared date: 2-JUNE -2010
Rev. 1
Page: 10 of 10
Prepared by: Irene Lin
Revision
:1
Release Date:2010-06-08 19:01:59.0 Expired Period: Forever
LifecyclePhase:

▲Up To Search▲

Price & Availability of 67-21-RSC-FT2V1B-2T

	To Download 67-21-RSC-FT2V1B-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .